Suppliers,exporters of Abrasives used in Blasting Machine in Jodhpur, INDIA

Types of abrasive used in Blasting Machine

Garnet Sand- Garnet sand is blasted on to the surface of the steel with the use of high pressure compressed air. This process helps in extending the life of the coating. It is used for oil firms, offshore applications, pipelines, heavy machinery repair, as abrasive. Sandblasting is a machine that uses abrasive Garnet with air pressure to clean or prepare surfaces for painting or other coatings. Sand blasting machines can also be used for the destruction of sand, it is also used to remove contaminated substances from metal products.

Different types of Garnet Available-

(Garnet 10/30 mesh,10/20 mesh,20/40 mesh,20/60 mesh,30/60 mesh,40/60 mesh,80 mesh)

Aluminum Oxide- Aluminum Oxide Grit is a sharp, long-lasting abrasive media that is highly efficient and highly reusable/recyclable thus cost-effective in nature. Harder than most blast media, Aluminum Oxide Blast Media, the powder will clean and etch quickly on all types of surfaces. Grits of this abrasive media are best for preparing the surface for the polishing and coating of blasting surfaces. It is also used often for surface cleaning because of the rugged nature of this blasting media.

Steel Shot- Abrasive Steel Shot is spherical or round particles like a circular ball made of molten steel through an atomization process; these cast steel shots are available in different sizes & hardness. Steel shots are made from steel scrap. It is made in an electric furnace. First, the steel scrap is melted in the furnace then it is being atomized/converted into the shot by water jet.

Copper Slag- Copper slag is a by-product of copper eduction by smelting. During dissolving, impurities become slag which floats on the molten metal. Slag that is quenched in water generates angular granules that are disposed of as waste or utilized as discussed below. This material represents a sought-after alternative to sand as a blasting medium in the industrial cleanup. Using blasting or high-pressure spraying, companies, and factories can use the copper slag to clean large smelting furnaces or equipment.

Steel Grit- Steel grit is fabricated by crushing, resulting in abrasive media and tempering it to the desired hardness. These abrasive Steel Grits are specially used in every type of wheel machine and also for the blast room where nozzles are employed in air blasting. Their sharp edges help in cleaning, etching, and smoothening of the blasting surface easily.