Airo Shot Blast

Types of abrasive used in Blasting Machine Garnet Sand- Garnet   sand  is blasted on to the surface of the steel with the use of high pressure compressed air. This process helps in extending the life of the coating. It is used for oil firms, offshore applications, pipelines, heavy machinery repair, as  abrasive . Sandblasting  is a machine that uses  abrasive  Garnet  with air pressure to clean or prepare surfaces for painting or other coatings. Sand blasting machines can also be used for the destruction of sand, it is also used to remove contaminated substances from metal products. Different types of Garnet Available- ( Garnet 10/30 mesh , 10/20 mesh,20/40 mesh,20/60 mesh,30/60 mesh,40/60 mesh,80 mesh) Aluminum Oxide-   Aluminum Oxide Grit  is a sharp, long-lasting abrasive media that is highly efficient and highly reusable/recyclable thus cost-effective in nature. Harder than most blast media,  Aluminum Oxide Blast Me...

Portable Sand Blasting Machine in India The portable sand blasting machine used to soften rough surfaces, this machine removes rust or corrosion from metal surfaces, gives a surface clean or shaped using abrasive material known as media. There are many different types of sand blasting machines such as Portable Sandblaster, Automatic Sand Blaster, Blast Cabinet , Tumblers, and many more. Portable Sand blasting Equipment Sand blasting  must be carried out with proper safety equipment in place and must be handled with care otherwise, it can cause anaphylactic shock to the operator or the person getting in contact. So the operator must use sand blasting safety wear while working. It includes the operator’s suit, rubber hand gloves, gumboots, helmet, etc. Different Configuration of Portable Sand Blasting Machine AIRO P7 150 – Sand Blasting Hopper Portable  Sand Blasting Hopper , Airo P7 150 is typically powered by sand blasting compressor, and the  sand...

Types of Sand blasting Machine Portable Sand blasting Machine -   Portable sand blasting machine used to soften rough surfaces, this machine removes rust from metal surfaces, gives a surface clean, or shaped using abrasive material known as media. There are many different types of sand blasting machines such as Portable Sandblaster, Automatic Sand Blaster, Blast Cabinet , Tumblers, and many more.  A Portable Sandblaster is often using by small and mid-sized companies such as Paint Shops, Auto Repair industry, Powder Coating Industry, and many more. Portable Sand blasting Equipment-   Sand blasting machines are using in many constructions and even crafts. Glass is frosted with a sandblaster normally for design or artwork. Large ships are sandblasted to clean up the rust for repainting. Sandblasters are used in car restoration and trucks to eliminate old paint and rust. Railroad cars are reconditioned by sandblasting the entire car to repaint. Many enterprises u...

Twin Arc Spray Gun Twin Arc spray gun  is a process that uses an electric arc to melt the wires. The molten metal is then atomized with compressed air to create a spray stream that applies the coating onto the surface being coated. Features of twin arc spray gun- Anti-corrosion coatings can be applied by arc spray. Arc spray systems are commonly considered to be easy to operate and handle and also to automate. Metallizing spray   has a full range of  arc spray  systems for hand-held and fully automatic/robotic applications. The  twin wire arc spray  process (TWA) utilizes metal in wire form materials. Heating and melting of the wire material occur when two electrically opposed charged wires, comprising the spray material, are fed together in such a manner that a controlled arc occurs at their intersection. The molten metal is atomized and sprayed onto the prepared workpiece by jets of compressed air or gas. The molten metal was...

What is powder flame spray? The Flame Powder Spray  process works a comparable technique as the  Flame Wire Spray  method, but that the wire feedstock is replaced by a powder. The main benefit of this method is that a much wider variety of materials (such as nickel or cobalt-based self Fixing composites or ceramic substances) can be easily treated into powder form providing a greater choice of coatings. Many compounds are difficult or cannot be presented in a wire form and for this purpose, it was produced. The method relies on the chemical reaction among oxygen and combustible of combustion to produce a flame source. This flame source produces a gas stream by temperature in excess of 3,000°C with correctly balanced conditions between oxygen and acetylene. The feedstock material to be spattered is fed into the flame in the form of a powder to melt and the thermal extension of the flaming is then used to atomize and stimulate the particles onto the component. ...